.5" (1/2" - 12mm) Kevlar Rope

Now: $2.57
(You save )
(2 reviews) Write a Review
Buy in bulk and save
  • Buy 20ft or more and save 10%
  • Buy 50ft or more and save 20%
  • Buy 100ft or more and save 30%
  • Buy 500ft or more and save 35%

This product is often used as an oven gasket.  

This rope is the standard for fire tool production. It is made from Kevlar coated Fiberglass yarn. The Kevlar provides strength and the fiberglass improves high temperature resistance.

This rope wick is ideal for making tied or braided wicks like monkey fist poi. Smaller rope is good for smaller wicks like eating torches.

It will take about 10-15ft of 1/2" rope to make a 4 row monkey fist head.

This rope should not be used under tension when exposed to fire because Kevlar looses a lot of strength at the higher temperature.

This rope has some stretch to it. It is not intended for lifting or pulling and is not load rated.

Sold by the foot (305mm) - You will receive a continuous length up to availability (typically over 100 ft lengths) 

Trick Concepts has been a family owned and operated business for over 10 years, located in Los Angeles, CA. We use high quality materials and manufacture onsite, which allows us to transfer the savings onto you. Our line of products are designed and created by Jaz, a mechanical engineer and custom metal fabricator and Scorch, an artist and fire performer. Each product is researched, designed and tested for durability and safety. Whether you are new to fire spinning, or are a large theatrical production company, we have what you're looking for.

We strive to be your number one choice in fire and LED equipment. Just the facts, without the hype.

Come Flow with us...

Warranty Information
60 Day Return if still in origional unmodified condition We offer 60 day money back guarantee on all products unless specified otherwise above. Custom orders will have a 20% restocking fee.
2 Reviews
  • 5
    Good Tight Knots

    Published by Ben on Sep 21st 2017

    Been buying 1/2in rope wick for the last 3ish years, and it still performs well! SUPER stretchy, holds knots extremely well. Plier tight the last knot, stitch down (kevlar or steel, Stainless Steel works wonders if you can fit it in an upholstery needle!) and keep applying glue to the cut after snipping the loose wick. Only problem I have with it, is it holds fuel too well with some traditional wicks.

  • 5
    the only place I order

    Published by Kyle on Nov 17th 2016

    Well I have been buying this kevlar from trick concepts for a while now. It has held up better than any of the other sources I have tried, doesn't fray out if untaped. All around it's the kevlar I buy!

Subscribe to our newsletter

Get the latest updates on new products and upcoming sales

No thanks