- Buy 20ft or more and save 10%
- Buy 50ft or more and save 20%
- Buy 100ft or more and save 30%
- Buy 500ft or more and save 35%
This product can also be used as a protective covering for Welding and Plasma cutter leads or other high temperature applications (Up to 600 F) where high abrasion resistance is desired. This can be used as an abrasion resistant exhaust wrap on the lower temperature parts of an exhaust system.
This tubing wick is ideal for making props such as swords, or covering hardware such as poi chains. This tubing can also be tightly stuffed with a loose fill fiberglass wick to make a long burning wicks. This tubing is sized by ID (Inside Diameter). For example, a 1" diameter rod will fit inside 1" tubing. When using this as a wick, you can increase burn time by tightly wrapping one or more layers of Nomex felt under it. The sleeve should be tight over any lower layers, otherwise you will fling fuel and the flame will tend to go out before using up all the fuel.
The tubing fabric is a little over 1/16" thick. It is about 2mm thick.
Sold by the foot (305mm)
Trick Concepts has been a family owned and operated business for over 10 years, located in Los Angeles, CA. We use high quality materials and manufacture onsite, which allows us to transfer the savings onto you. Our line of products are designed and created by Jaz, a mechanical engineer and custom metal fabricator and Scorch, an artist and fire performer. Each product is researched, designed and tested for durability and safety. Whether you are new to fire spinning, or are a large theatrical production company, we have what you're looking for.
We strive to be your number one choice in fire and LED equipment. Just the facts, without the hype.
Come Flow with us...