Rebar Stakes

Trick Concepts offers a complete line of rebar stakes.  They can be purchased individually and in sets.  We offer stakes in different sizes, and have what you need to anchor anything from small tents to large portable structures.  We also offer parts that can be combined with commonly available tarps, camo netting, etc., under our Customizable Structures category.,  All of our stakes are painted safety orange for visibility and rust prevention.  If you don't see what you are looking for, contact us at 310-686-4820, or email at david@trickconcepts.com

A Guide for properly installing stakes is included with each order.

Standard Rebar Stakes

These multi-purpose standard stakes are what you would typically use for tents or premanufactured shade structure.  All our stakes have a sharp bend at the top and not the J-curve often seen from home made stakes.  The j-curve makes it hard to pound in the stakes because it acts as a spring that tends to throw the hammer back at you.   This sharp bend also provides an arm buries itself in the ground to prevent the stake from rotating.   These are available in 2 different sizes:

Medium - 3/8" diameter and 11" long

Large - 1/2" diameter and 17" long

Heavy Rebar Stakes

These stakes are larger, heavier and different in construction than the standard stakes.  Made from two pieces of welded rebar instead of a bent piece, they have a flatter top which makes pounding it easier when using a large hammer such as a sledge hammer. With their 5/8" diameter and 23" length, they are great for larger structures

Welded Ring Rebar Stakes

These stakes have all the functionality of regular stakes, but provide a welded ring that gives an additional tie down location.  These are very useful for hooking onto ratchet straps, carabineers or when using multiple guy-wires on one stake.  The smooth surface of the rings alows rope to slide for easy sinching and prevents the stake from twisting.