Collapsible Fire Hula Hoop

Looking for a High Quality Collapsible Fire Hoop?  Find out what makes our Hoops different from the rest.

Design:  All of our Hoops and Spines are designed and manufactured in-house by Jaz, a mechanical engineer.  Our collapsible hoops break down into 3 pieces for easy transport and snaps back together quickly and rigidly. 

Construction:  Our hoops are made from 3/4" polyethylene gas pipe (outside diameter measures about 1" or 26mm). Gas tubing is more expensive than the irrigation tubing that most people use, but we spend the extra money to get this superior tubing because gas tubing holds its shape better and wobbles less than irrigation tubing. The insert nuts in our hoop go all the way through both sides of the hoop, increasing the strength at the wick attachment point. We do not use jack-nuts, which tend to break when they hit the ground. A strip of gaffers tape runs along the inside perimeter of the hoop for extra grip and to reduce slippage.

Connectors:  Our connectors are precision machined for a smooth fit which prevents wobbling while hooping. All of our connectors have a built in double-push button latch that keeps the hoop extra rigid during use.

Disassembly:  All hoops come with a key chain tool for quick disassembly.  Simply use tool provided to compress push button latch connectors and pull apart.

Flexible Spine Wicks:  Our hoops feature 6 removable spines.  These spine wicks were specifically designed to flex when they hit the ground to prevent breakage. A special blend of polyurethane rubber is molded into a stem which is securely attached to stainless steel rods and Kevlar wicks, acting as a base. While flexible, these polyurethane stems are rigid enough to prevent the wicks from wobbling and will hold the weight of the hoop standing. The polyurethane also acts as a lock when tightened against the hoop to reduce the likelihood of wicks coming loose during use.  The polyurethane also absorbs wick wobble instead of amplifying it like a spring spines are prone to do. Simply unscrew the spine wicks to detach for easy transport, transforming your fire hoop into a practice hoop!

Padding: Our Hoops are padded for comfort!  We put a strip of foam around the inside of the hoop under the tape to reduce fatigue and bruising.  It's been referred to as the Cadillac of hoops!

Size Choices:  Our Hoops are available in 3 sizes: 38" (97cm) diameter, 40" (102cm) diameter, and 44"(112cm) diameter (outside measurement).

Spine Choices:  Spines are available in 2 lengths: 6.5" (165mm) and 8.5" (216mm) long. Shorter spines are great for tricks and quick maneuvers which require getting the hoop close to the ground, however may become very hot if you don't keep the hoop moving. Longer spines get the fire further away from your hands and body to reduce the heat you feel. Keep in mind the longer the spines will have less ground clearance.

Wick Choices:  Wick heads are available in 3 sizes: Beginner, Intermediate, and Advanced.  Beginner wicks are 1.5" (38mm) wide and 1.5" (38mm) diameter, and use   ft. of Kevlar wick.  Intermediate wicks are 1.5" (38mm) wide and 1.75" (50mm) in diameter and use     ft. of Kevlar wick. Advanced wicks are 1.5” (38mm) wide and 2” (50mm) in diameter and use    ft. of Kevlar wick.

Color Choices: Hoops are Also Available in 5 double accent colors (Candy Raver, Fire Freak, Cyber Punk, Dirty Peacock, and American Revolution).

Color Choices:  Choice of 8 single accent colors (Neon Green, Hot Pink, Neon Yellow, Neon Orange, Blue, Red, Purple and Black)

Our Friend “Foxie Jen”  fire hooping.